Getting Started with Exchanger Design and Rating in Aspen HYSYS

Menu
Notes

1. Welcome!
2. Module Description
3. Introduction to Heat Exchanger Modeling in Aspen HYSYS
3.1. Objectives
3.2. Unit Operations for Heat Exchange in Aspen HYSYS
3.3. Heat Exchanger Model Types
3.4. Air Cooler Model Types
3.5. LNG Model Types
3.6. FiredHeater Model Types
4. Integrating Rigorous Models into Flowsheets
4.1. Objectives
4.2. Supported Exchanger Workflows
4.3. Comparison of Integration Methods
5. Autosizing
5.1. Objectives
5.2. Autosizing
5.3. Example Workflow
6. Interactive Sizing
6.1. Objectives
6.2. Interactive Sizing
6.3. EDR Sizing Console
7. Specify Exchanger Geometry
7.1. Objectives
7.2. Specify Exchanger Geometry
7.3. Exchanger Design
8. Import from EDR
8.1. Objectives
8.2. Importing an EDR File
8.3. Steps to Import an EDR File
9. Activated EDR
9.1. Objectives
9.2. Overview of Activated EDR
9.3. Visualizing Model Status
9.4. Identify and Troubleshoot Operational Risks
9.5. Managing Heat Exchangers
10. Supplemental Resources
10.1. aspenONE Exchange
10.2. Aspen HTFS
10.3. HTFS Research Network from within HYSYS (V8.8)
10.4. Vibration Guide
11. Copyright

FINISH

SUBMIT

NEXT

PREV